Which Ethernet + Coax Wall Plate Bundle Fits Your Room?

A clean network drop should do two things well: bring the right connections to the wall and keep the finished plate simple for the person using it. That is why an Ethernet + coax wall plate bundle can be useful for cable modem setups, TV rooms, home offices, and small network upgrades. Instead of buying a wall plate, coax connector, RJ45 keystone jack, and extra parts separately, the bundle gives you the core pieces in one place.

At R.J. Enterprises, the Ethernet + coax wall plate bundles are built around a 2-port finish: one RJ45 Ethernet connection and one F-type coax connection. The main decision is which RJ45 side fits the job. Here is a simple way to choose. 

For A Cable Modem Or Router Area 

If the wall plate is going behind a cable modem, router, or gateway, start with a bundle that keeps the install straightforward and upgrade-friendly. The RJ-EC-01 Cat6A Blue Keystone Jack + Coax Wall Plate Bundle is a good fit when you want Cat6A performance in a standard home network drop. It gives the room a clean coax connection for the incoming cable line and an RJ45 jack for Ethernet.

For many home internet setups, that means fewer loose cables, less visual clutter, and a wall plate that looks intentional instead of temporary.

For Home Office, Homelab, Or PoE Devices  

If the cable run is near other electrical equipment, network racks, cameras, access points, or PoE devices, look at the RJ-EC-02 Cat6A Shielded Keystone Jack + Coax Wall Plate Bundle. The shielded Cat6A jack is designed for higher-performance, cleaner signal paths in setups where interference protection matters.

This is the bundle I would choose for homelab racks, office wiring, commercial-style drops, IP cameras, PoE device wiring, and higher-interference environments. If the buyer is already thinking about 10Gbps, PoE++, or a more serious network build, RJ-EC-02 is usually the stronger recommendation.

For A Simple Cat6 Wall Plate Finish

Not every room needs shielded Cat6A. For a clean, practical Ethernet + coax finish, the RJ-EC-04 Cat6 Blue Keystone Jack + Coax Wall Plate Bundle is a solid option. It is useful for bedrooms, TV rooms, basic router locations, and general structured wiring projects where Cat6 is enough for the job.

This is the bundle to consider when the customer wants a neat wall plate without overcomplicating the parts list.

For Buyers Who Want More Flexibility

The RJ-EC-00 Cat6/Cat6A RJ45 Keystone Jack + Coax Wall Plate Bundle is useful when a buyer wants more choice across Cat6, Cat6A, jack, or coupler combinations. This can help when the installer is matching existing cable, replacing older plates, or keeping a few common options on hand.

For contractors and repeat buyers, that flexibility can reduce extra ordering and make small jobs easier to finish.

Quick Buying Guide 

• Choose RJ-EC-01 for a clean Cat6A home internet, modem, or router setup.
• Choose RJ-EC-02 for shielded Cat6A, homelab, office, PoE, or higher-interference installs.
• Choose RJ-EC-04 for a simple Cat6 Ethernet + coax wall plate finish.
• Choose RJ-EC-00 when you want flexible Cat6/Cat6A bundle options.

Why Buy The Bundle Instead Of Separate Parts?

The main reason is consistency. A bundle keeps the plate, coax side, and RJ45 side together, so the buyer is not guessing which parts match. That matters for homeowners finishing one room and for low-voltage buyers ordering parts for several drops.

It also helps the finished job look cleaner. One wall plate can support both coax and Ethernet in the same location, which is useful for cable modem installs, TV areas, home offices, and structured wiring updates.

Browse the full Ethernet + Coax Wall Plate Bundle collection to compare the available RJ45 keystone jack and coax wall plate options.